Cut’n’Polish

Description

Cut’n’Polish is a blend of two waxesUsing a wax is one of the quickest and easiest ways of getting a good finish on your work. Turned pieces buff easily on the lathe and just a little bit of effort will soon achieve a pleasing glow on larger items. We use several different types of wax, from natural waxes such as beeswax and carnauba ... More with a fine abrasive held in suspension within them.

This is a soft wax designed to stay ‘wet’ slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere.

On bare wood; sand to 240 grit as normal, apply a coat of Cut’n’Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time.
On sealed wood apply after the sealer in the same way, polishing to a slightly higher shine.

Cut’n’Polish dries almost immediately and can be overcoated with Friction Polish or any of our waxesUsing a wax is one of the quickest and easiest ways of getting a good finish on your work. Turned pieces buff easily on the lathe and just a little bit of effort will soon achieve a pleasing glow on larger items. We use several different types of wax, from natural waxes such as beeswax and carnauba ... More for a higher shine.